taxprofiler/docs/usage.md

nf-core/taxprofiler: Usage

⚠️ Please read this documentation on the nf-core website: https://nf-co.re/taxprofiler/usage

Documentation of pipeline parameters is generated automatically from the pipeline schema and can no longer be found in markdown files.

Introduction

Samplesheet inputs

You will need to create a samplesheet with information about the samples you would like to analyse before running the pipeline. Use this parameter to specify its location. It has to be a comma-separated file with 6 columns, and a header row as shown in the examples below. Furthermother, nf-core/taxprofiler also requires a second comma-separated file of 3 columns with a header row as in the examples below.

This samplesheet is then specified on the command line as follows:

--input '[path to samplesheet file]' --databases '[path to database sheet file]'

Multiple runs of the same sample

The sample identifiers have to be the same when you have re-sequenced the same sample more than once e.g. to increase sequencing depth. The pipeline will process reads before performing profiling. Below is an example for the same sample sequenced across 3 lanes:

sample,run_accession,instrument_platform,fastq_1,fastq_2,fasta
2612,run1,ILLUMINA,2612_run1_R1.fq.gz,,
2612,run2,ILLUMINA,2612_run2_R1.fq.gz,,
2612,run3,ILLUMINA,2612_run3_R1.fq.gz,2612_run3_R2.fq.gz,

⚠️ Runs of the same sample sequenced on Illumina platforms with a combination of single and paired-end data will not be run-wise concatenated, unless pair-merging is specified. In the example above, run3 will be profiled independently of run1 and run2 if pairs are not merged.

Full samplesheet

The pipeline will auto-detect whether a sample is single- or paired-end using the information provided in the samplesheet. The samplesheet can have as many columns as you desire, however, there is a strict requirement for the first 6 columns to match those defined in the table below.

A final samplesheet file consisting of both single- and paired-end data, as well as long-read FASTA fies may look something like the one below. This is for 6 samples, where 2612 has been sequenced twice.

2611,ERR5766174,ILLUMINA,,,/<path>/<to>/fasta/ERX5474930_ERR5766174_1.fa.gz
2612,ERR5766176,ILLUMINA,/<path>/<to>/fastq/ERX5474932_ERR5766176_1.fastq.gz,/<path>/<to>/fastq/ERX5474932_ERR5766176_2.fastq.gz,
2612,ERR5766180,ILLUMINA,/<path>/<to>/fastq/ERX5474936_ERR5766180_1.fastq.gz,,
2613,ERR5766181,ILLUMINA,/<path>/<to>/fastq/ERX5474937_ERR5766181_1.fastq.gz,/<path>/<to>/fastq/ERX5474937_ERR5766181_2.fastq.gz,
ERR3201952,ERR3201952,OXFORD_NANOPORE,/<path>/<to>/fastq/ERR3201952.fastq.gz,,

Column	Description
sample	Unique sample name [required].
run_accession	Run ID or name unique for each (pairs of) file(s) .Can also supply sample name again here, if only a single run was generated [required].
instrument_platform	Sequencing platform reads generated on, selected from the EBI ENA controlled vocabulary [required].
fastq_1	Path or URL to sequencing reads or for Illumina R1 sequencing reads in FASTQ format. GZipped compressed files accepted. Can be left empty if data in FASTA is specifed. Cannot be combined with fasta.
fastq_2	Path or URL to Illumina R2 sequencing reads in FASTQ format. GZipped compressed files accepted. Can be left empty if single end data. Cannot be combined with fasta.
fasta	Path or URL to long-reads or contigs in FASTA format. GZipped compressed files accepted. Can be left empty if data in FASTA is specifed. Cannot be combined with fastq_1 or fastq_2.

An example samplesheet has been provided with the pipeline.

Full database sheet

nf-core/taxprofiler supports multiple databases being profiled in parallel for each tool. These databases, and specific parameters for each, can be specified in a 4 column comma-separated sheet.

⚠️ nf-core/taxprofiler does not provide any databases by default, nor does it currently generate them for you. This must be performed manually by the user.

An example database sheet can look as follows, where 4 tools are being used, and malt and kraken2 will be used against two databases each.

tool,db_name,db_params,db_path
malt,malt85,-id 85,/<path>/<to>/malt/testdb-malt/
malt,malt95,-id 90,/<path>/<to>/malt/testdb-malt.tar.gz
kraken2,db1,,/<path>/<to>/kraken2/testdb-kraken2.tar.gz
kraken2,db2,--quick,/<path>/<to>/kraken2/testdb-kraken2.tar.gz
centrifuge,db1,,/<path>/<to>/centrifuge/minigut_cf.tar.gz
metaphlan3,db1,,/<path>/<to>/metaphlan3/metaphlan_database/

Column specifications are as follows:

Column	Description
tool	Taxonomic profiling tool (supported by nf-core/taxprofiler) that the database has been indexed for [required].
db_name	A unique name of the particular database [required].
db_params	Any parameters of the given taxonomic profiler that you wish to specify that the taxonomic profiling tool should use when profiling against this specific. Can be empty to use taxonomic profiler defaults Must not be surrounded by quotes [required].
db_path	Path to the database. Can either be a path to a directory containing the database index files or a .tar.gz file which contains the compressed database directory with the same name as the tar archive, minus .tar.gz [required].

💡 You can also specify the same database directory/file twice (ensuring unique db_names) and specify different parameters for each database to compare the effect of different parameters during profiling.

Profilers

• kaiju
  • The file nodes.dmp must be inside the database directory that is specified to --databases file

Running the pipeline

The typical command for running the pipeline is as follows:

nextflow run nf-core/taxprofiler --input samplesheet.csv --databases databases.csv --outdir <OUTDIR> -profile docker --run_<TOOL1> --run_<TOOL2>

This will launch the pipeline with the docker configuration profile. See below for more information about profiles.

Note that the pipeline will create the following files in your working directory:

work                # Directory containing the nextflow working files
<OUTDIR>            # Finished results in specified location (defined with --outdir)
.nextflow_log       # Log file from Nextflow
# Other nextflow hidden files, eg. history of pipeline runs and old logs.

Updating the pipeline

When you run the above command, Nextflow automatically pulls the pipeline code from GitHub and stores it as a cached version. When running the pipeline after this, it will always use the cached version if available - even if the pipeline has been updated since. To make sure that you're running the latest version of the pipeline, make sure that you regularly update the cached version of the pipeline:

nextflow pull nf-core/taxprofiler

Reproducibility

It is a good idea to specify a pipeline version when running the pipeline on your data. This ensures that a specific version of the pipeline code and software are used when you run your pipeline. If you keep using the same tag, you'll be running the same version of the pipeline, even if there have been changes to the code since.

First, go to the nf-core/taxprofiler releases page and find the latest version number - numeric only (eg. 1.3.1). Then specify this when running the pipeline with -r (one hyphen) - eg. -r 1.3.1.

This version number will be logged in reports when you run the pipeline, so that you'll know what you used when you look back in the future.

Core Nextflow arguments

NB: These options are part of Nextflow and use a single hyphen (pipeline parameters use a double-hyphen).

-profile

Use this parameter to choose a configuration profile. Profiles can give configuration presets for different compute environments.

Several generic profiles are bundled with the pipeline which instruct the pipeline to use software packaged using different methods (Docker, Singularity, Podman, Shifter, Charliecloud, Conda) - see below. When using Biocontainers, most of these software packaging methods pull Docker containers from quay.io e.g FastQC except for Singularity which directly downloads Singularity images via https hosted by the Galaxy project and Conda which downloads and installs software locally from Bioconda.

We highly recommend the use of Docker or Singularity containers for full pipeline reproducibility, however when this is not possible, Conda is also supported.

The pipeline also dynamically loads configurations from https://github.com/nf-core/configs when it runs, making multiple config profiles for various institutional clusters available at run time. For more information and to see if your system is available in these configs please see the nf-core/configs documentation.

Note that multiple profiles can be loaded, for example: -profile test,docker - the order of arguments is important! They are loaded in sequence, so later profiles can overwrite earlier profiles.

If -profile is not specified, the pipeline will run locally and expect all software to be installed and available on the PATH. This is not recommended.

• docker
  • A generic configuration profile to be used with Docker
• singularity
  • A generic configuration profile to be used with Singularity
• podman
  • A generic configuration profile to be used with Podman
• shifter
  • A generic configuration profile to be used with Shifter
• charliecloud
  • A generic configuration profile to be used with Charliecloud
• conda
  • A generic configuration profile to be used with Conda. Please only use Conda as a last resort i.e. when it's not possible to run the pipeline with Docker, Singularity, Podman, Shifter or Charliecloud.
• test
  • A profile with a complete configuration for automated testing
  • Includes links to test data so needs no other parameters

-resume

Specify this when restarting a pipeline. Nextflow will use cached results from any pipeline steps where the inputs are the same, continuing from where it got to previously. For input to be considered the same, not only the names must be identical but the files' contents as well. For more info about this parameter, see this blog post.

You can also supply a run name to resume a specific run: -resume [run-name]. Use the nextflow log command to show previous run names.

-c

Specify the path to a specific config file (this is a core Nextflow command). See the nf-core website documentation for more information.

Custom configuration

Resource requests

Whilst the default requirements set within the pipeline will hopefully work for most people and with most input data, you may find that you want to customise the compute resources that the pipeline requests. Each step in the pipeline has a default set of requirements for number of CPUs, memory and time. For most of the steps in the pipeline, if the job exits with any of the error codes specified here it will automatically be resubmitted with higher requests (2 x original, then 3 x original). If it still fails after the third attempt then the pipeline execution is stopped.

For example, if the nf-core/rnaseq pipeline is failing after multiple re-submissions of the STAR_ALIGN process due to an exit code of 137 this would indicate that there is an out of memory issue:

[62/149eb0] NOTE: Process `NFCORE_RNASEQ:RNASEQ:ALIGN_STAR:STAR_ALIGN (WT_REP1)` terminated with an error exit status (137) -- Execution is retried (1)
Error executing process > 'NFCORE_RNASEQ:RNASEQ:ALIGN_STAR:STAR_ALIGN (WT_REP1)'

Caused by:
    Process `NFCORE_RNASEQ:RNASEQ:ALIGN_STAR:STAR_ALIGN (WT_REP1)` terminated with an error exit status (137)

Command executed:
    STAR \
        --genomeDir star \
        --readFilesIn WT_REP1_trimmed.fq.gz  \
        --runThreadN 2 \
        --outFileNamePrefix WT_REP1. \
        <TRUNCATED>

Command exit status:
    137

Command output:
    (empty)

Command error:
    .command.sh: line 9:  30 Killed    STAR --genomeDir star --readFilesIn WT_REP1_trimmed.fq.gz --runThreadN 2 --outFileNamePrefix WT_REP1. <TRUNCATED>
Work dir:
    /home/pipelinetest/work/9d/172ca5881234073e8d76f2a19c88fb

Tip: you can replicate the issue by changing to the process work dir and entering the command `bash .command.run`

To bypass this error you would need to find exactly which resources are set by the STAR_ALIGN process. The quickest way is to search for process STAR_ALIGN in the nf-core/rnaseq Github repo. We have standardised the structure of Nextflow DSL2 pipelines such that all module files will be present in the modules/ directory and so, based on the search results, the file we want is modules/nf-core/software/star/align/main.nf. If you click on the link to that file you will notice that there is a label directive at the top of the module that is set to label process_high. The Nextflow label directive allows us to organise workflow processes in separate groups which can be referenced in a configuration file to select and configure subset of processes having similar computing requirements. The default values for the process_high label are set in the pipeline's base.config which in this case is defined as 72GB. Providing you haven't set any other standard nf-core parameters to cap the maximum resources used by the pipeline then we can try and bypass the STAR_ALIGN process failure by creating a custom config file that sets at least 72GB of memory, in this case increased to 100GB. The custom config below can then be provided to the pipeline via the -c parameter as highlighted in previous sections.

process {
    withName: 'NFCORE_RNASEQ:RNASEQ:ALIGN_STAR:STAR_ALIGN' {
        memory = 100.GB
    }
}

NB: We specify the full process name i.e. NFCORE_RNASEQ:RNASEQ:ALIGN_STAR:STAR_ALIGN in the config file because this takes priority over the short name (STAR_ALIGN) and allows existing configuration using the full process name to be correctly overridden.

If you get a warning suggesting that the process selector isn't recognised check that the process name has been specified correctly.

Updating containers

The Nextflow DSL2 implementation of this pipeline uses one container per process which makes it much easier to maintain and update software dependencies. If for some reason you need to use a different version of a particular tool with the pipeline then you just need to identify the process name and override the Nextflow container definition for that process using the withName declaration. For example, in the nf-core/viralrecon pipeline a tool called Pangolin has been used during the COVID-19 pandemic to assign lineages to SARS-CoV-2 genome sequenced samples. Given that the lineage assignments change quite frequently it doesn't make sense to re-release the nf-core/viralrecon everytime a new version of Pangolin has been released. However, you can override the default container used by the pipeline by creating a custom config file and passing it as a command-line argument via -c custom.config.

1. Check the default version used by the pipeline in the module file for Pangolin

2. Find the latest version of the Biocontainer available on Quay.io

3. Create the custom config accordingly:

   • For Docker:

     process {
         withName: PANGOLIN {
             container = 'quay.io/biocontainers/pangolin:3.0.5--pyhdfd78af_0'
         }
     }
     

   • For Singularity:

     process {
         withName: PANGOLIN {
             container = 'https://depot.galaxyproject.org/singularity/pangolin:3.0.5--pyhdfd78af_0'
         }
     }
     

   • For Conda:

     process {
         withName: PANGOLIN {
             conda = 'bioconda::pangolin=3.0.5'
         }
     }
     

NB: If you wish to periodically update individual tool-specific results (e.g. Pangolin) generated by the pipeline then you must ensure to keep the work/ directory otherwise the -resume ability of the pipeline will be compromised and it will restart from scratch.

nf-core/configs

In most cases, you will only need to create a custom config as a one-off but if you and others within your organisation are likely to be running nf-core pipelines regularly and need to use the same settings regularly it may be a good idea to request that your custom config file is uploaded to the nf-core/configs git repository. Before you do this please can you test that the config file works with your pipeline of choice using the -c parameter. You can then create a pull request to the nf-core/configs repository with the addition of your config file, associated documentation file (see examples in nf-core/configs/docs), and amending nfcore_custom.config to include your custom profile.

See the main Nextflow documentation for more information about creating your own configuration files.

If you have any questions or issues please send us a message on Slack on the #configs channel.

Running in the background

Nextflow handles job submissions and supervises the running jobs. The Nextflow process must run until the pipeline is finished.

The Nextflow -bg flag launches Nextflow in the background, detached from your terminal so that the workflow does not stop if you log out of your session. The logs are saved to a file.

Alternatively, you can use screen / tmux or similar tool to create a detached session which you can log back into at a later time. Some HPC setups also allow you to run nextflow within a cluster job submitted your job scheduler (from where it submits more jobs).

Nextflow memory requirements

In some cases, the Nextflow Java virtual machines can start to request a large amount of memory. We recommend adding the following line to your environment to limit this (typically in ~/.bashrc or ~./bash_profile):

NXF_OPTS='-Xms1g -Xmx4g'